Publicidad
Enlaces rápidos
Publicidad
Manuales relacionados para Guinaz KC001
Resumen de contenidos para Guinaz KC001
- Página 1 CODED ACCESS KIT REF. KC001 GUÍA DE INSTALACIÓN INSTALLATION GUIDE...
- Página 2 ÍNDICE. INDEX. Description Connection diagram and section table..Installation of equipment Installation of the street panel Installation of the power supply Configuration Programming access codes Door opener activation period configuration General operating...
- Página 3 1. DESCRIPCIÓN. DESCRIPTION. The coded access kit is made up of: A street panel, made up of a viewer group and the coded access module. A flush-mounted box in which to assemble the street panel. A standard alternating current door opener. An F1318 power supply, providing 12Vac 1A.
- Página 4 2. ESQUEMAS DE CONEXION Y TABLA DE SECCIONES. CONNECTION DIAGRAMS AND SECTION TABLE. F1318 Auxiliary door opener push-button (optional) Alternating current door opener (12 Vac, max 1A) Secciones mínimas (mm²) Minimum sections Distancia Conexiones Distance Connections 3. INSTALACIÓN DE LOS EQUIPOS. INSTALLATION OF EQUIPMENT.
- Página 5 To open towards the right, unscrew left screw and loosen the right one. Move 1.5 mm to the left and the front. Open the street panel. To open towards the left, unscrew right screw and loosen the left one. Move 1.5 mm to the right and the front. Open the street panel.
- Página 6 3.2 INSTALACIÓN DE LA FUENTE DE ALIMENTACIÓN. POWER SUPPLY INSTALLATION. Perform The power supply can be installed on a DIN slide (figure A) or by connections. Assemble the protection piece using means of sleeper-screws into the wall but always internally (figure B), the two screws of the power supply.
- Página 7 4.2 CONFIGURACIÓN DEL TIEMPO DE ACTIVACIÓN DEL ABREPUERTAS. DOOR OPENER ACTIVATION PERIOD CONFIGURATION. The group includes two micro-switches to programme the door opener activation period at 1, 3, 5 or 7 seconds. The following figure shows the different positions of the micro-switches for the different door opener activation periods: 5.