Publicidad
3
A.
the right one.
B.
C.
4
A.
the left one.
B.
C.
5
Connect the cables to the coded
access module.
UNA VEZ INSTALADA LA PLACA CALLE, RECUERDE QUE:
• PARA ABRIR LA PLACA CALLE NO HAY QUE QUITAR LAS
TAPAS SUPERIOR E INFERIOR.
LAS TAPAS SUPERIOR E INFERIOR SÓLO PUEDEN
PONERSE O QUITARSE CON LA PLACA CALLE ABIERTA.
Open the street panel.
Open the street panel.
6
IMPORTANTE:
IMPORTANT: CLIP ON THE OVER AND
LOWER COVERS BEFORE CLOSING THE
STREET PANEL.
To open towards the right, unscrew left screw and loosen
Move 1.5 mm to the left and the front.
To open towards the left, unscrew right screw and loosen
Move 1.5 mm to the right and the front.
ONCE THE STREET PANEL IS INSTALLED, REMEMBER:
• TO OPEN THE STREET PANEL IT IS NOT NECESSARY TO
REMOVE THE UPPER AND LOWER COVERS. It is only
necessary to unscrew one screw and to loosen the other (see
sections 3 and 4).
• THE UPPER AND LOWER COVERS CAN ONLY BE FITTED
IN OR REMOVED WITH THE STREET PANEL OPEN. Once
this is closed, the anchoring clips of the covers are left trapped
by the panel itself in order to avoid actions of vandalism.
Internal handling of the equipment may only be performed by
specialised personnel, always once the equipment has been
disconnected from the power supply.
7
Close the street
panel by tightening both screws.
Publicidad
