Before Returning For Repairs; Replacement Parts - DieHard 028-43448 Manual Del Usuario

Smart Cable LED and Alarm Behavior
BEHAVIOR
Green LED blinking; Red LED
off; no beep.
Green LED solid; Red LED off;
no beep.
Solid Red LED, Green LED off;
beeps once per second
Solid Red LED, Green LED off;
beeps twice per second
Alternating Red and Green
flashing LEDs; no beep
Solid Red LED, Green LED off;
rapid beeping
Solid Red and Green LEDs;
beeps once per second
NOTE: When the condition is corrected, the smart cable will automatically reset.

11. BEFORE RETURNING FOR REPAIRS

When an UNKNOWN OPERATING PROBLEM arises, please read
the complete manual and call the customer service number for
information. This will usually eliminate the need for return.
If the above solutions do not eliminate the problem,
or for information about troubleshooting or replacement parts,
12. SPECIFICATIONS
Internal battery type .......................................... Lithium ion polymer
Capacity ............................................................8,000 mAh/29.6 Wh
USB output .............................................................5V DC, 2.1A / 1A
Jump start ................................................400A peak/200A cranking
Charging Temperature..................................... 32 ° -122 ° F (0 ° -50 ° C)

13. REPLACEMENT PARTS

Battery clamp smart cable .......................................... 3899003854Z
Micro USB-USB charging cable ................................. 3899003781Z
call toll-free from anywhere in the U.S.A.
1-800-621-5485
Cable is connected to battery only.
Cable is connected to jump starter only.
Cable is connected correctly to both
battery and jump starter.
Low voltage protection
Reverse polarity protection
Reverse charging protection
Short circuit protection
Temperature protection
• 10 •
REASON