General Electric 11270 Manual Del Usuario página 13

4. Once found, Choose "GE
HD Receiver" and Enter
"0000" if asked for a PIN
(some devices do not
require a PIN).
Notes:
1. Once paired, the blue LED light on the GE HD Audio Receiver will flash once. The blue LED will
stay ON when a connection is established, and the connected device is in range.
2. Some devices, such as smartphones, will auto-connect after pairing, so the LED will be ON
immediately. Other devices, such as an Ultrabook, may ask to connect first, (the LED will be
OFF until a connection is established).
5. Once paired, the GE HD
Receiver should move
to the Paired devices
section of the Bluetooth
settings. You are now
connected to the "GE HD
Receiver" and can begin
to enjoy your music
wirelessly.
11