Setting Up Your Ge Branded Hd Audio Receiver - General Electric 11270 Manual Del Usuario

Setting up your GE branded HD Audio Receiver

The GE HD Audio Receiver is equipped with 3.5mm stereo output and optical output, but you can use
only one output at a time, this means you need to change the switch setting on the back of GE HD
Audio Receiver shown below.
Analog (stereo) connection
1. Connect one 3.5mm end of the included 3.5mm cable to the audio out connection on the GE HD
Audio Receiver.
2. Connect the other end to the audio input on your home stereo system, soundbar or computer
speakers using the 3.5mm or the RL Audio adapter.
Note: Consult your stereo user's manual for more information on audio inputs available
and their locations.
micro USB AC
power adapter
soundbar
GE HD audio receiver
2
3.5mm to 3.5mm
audio cable
3.5mm female
to right/left
audio cable