Troubleshooting - Apex XT Fit Manual De Usuario

XT Fit /English

6. Troubleshooting

The table below lists troubleshooting solutions for the problems that may happen. If the problem persists, contact
your equipment provider service agent.
P r o b l e m
No display
Display code incorrect
Illuminant under LCD is
not on
Buttons disable
Air delivered is slow
Error / Warning Messages show in LCD
Message type
Error:
Primary function
execute.
Warning:
NOTE:
P o s s i b l e C a u s e s
1. The power cord is not connected
to the power socket.
2. LCD failure or controlled PCB
failure.
LCD failure or controlled PCB failure.
LED failure
Button failure
1. During ramp time.
2. Filter is too dirty.
3. Flow generator failure.
Definition
Error for abnormal system settings
can't
Error for flow generator failure
Out of system memory
1. System memory is nearly full
2. Memory resetting problem
When the warning message appears, contact your physician or equipment
provider to download the memory data and reset the meter.
S o l u t i o n s
1. Ensure the power cord is
connected.
2. Contact your equipment
provider for repair.
Contact your equipment provider for
repair.
Contact your equipment provider for
repair.
Contact your equipment provider for
repair.
1. Check the ramp time setting
2. Change or clean the filter
regularly.
3. Contact your equipment
provider for repair.
Message in LCD
Error 001
Error 002
Warn 001
Warn 002
13