D-Link DAS-3248 Guía De Instalación Rápida página 2

Setup the DAS-3248 ADSL IP DSLAM
The DAS-3248 can be installed in a standard 19-inch rack, by using the
mounting brackets provided. Mount the shelf on the rack using the large
screws provided. The procedure to connect and wire the system is as
follows.
Rear Panel Connection
The following figure shows the rear panel connection of DAS-3248:
Step 1: Ground the DAS-3248 by connecting a grounded wire
Step 2: Connect the ADSL line connector, a 50-pin centronic connector,
Step 3: Connect the phone connector, a 50-pin centronic connector, of
Step 4: Connect the power adapter and plug it into an outlet.
of DAS-3248 to CPE by using telco cable. Each line connector
supports 24 ports of ADSL/ADSL2/2+ for Data path from
MDF(Main Distribution Frame).
DAS-3248 to Exchange/PBX by using telco cable. phone
connector is an optional module supporting Voice path to
Exchange/PBX; it must be along with Line Connector.
2