Voice Commands Settings - Verizon Wireless RAZZLE Guia Del Usuario

VOICE COMMANDS SETTINGS

CONFIRM CHOICES
When the phone does not recognize your voice command, it will ask you to repeat your
voice command. If it does not recognize the name or number, it will display a list of up
to three choices and speak each one in turn. You can control how often the phone asks
you to confirm the recognized name or number.
1. From idle mode, press the OK Key to unlock the keypad, press the
OK Key [MENU], swivel to the QWERTY keypad and press
& Tools, 2. Tools, 1. Voice Commands.
2. Press the Right Soft Key
You can also access Voice Commands Settings
unlock the keypad, press the OK Key [MENU], swivel to the QWERTY keypad and press
Settings & Tools, 6. Phone Settings, 3. Voice Commands
3. Select Automatic,
Always Confirm
OK Key [SET].
SENSITIVITY
The Sensitivity setting allows you to adjust the sensitivity monitoring of voice tones.
If you frequently experience the messages
RECOGNIZED Try again?", adjust the sensitivity toward Less Sensitive. If you frequently
experience false activations (when the phone recognizes a name you didn't say), adjust
9. Settings
[Settings] and 1. Confirm Choices.
from idle mode, by pressing the OK Key to
Settings, 1. Confirm Choices.
or Never Confirm, then press the
"Please try again" or "COMMAND NOT
the sensitivity toward More Sensitive.
1. From idle mode, press the OK Key to unlock the keypad, press the
OK Key [MENU], swivel to the QWERTY keypad and press
& Tools, 2. Tools, 1. Voice
2. Press the Right Soft Key
3. Select
More Sensitive,
OK Key [SET].
ADAPT VOICE
Voice Command is speaker independent, which means that no training or adaptation
is required. Some users with heavy accents or unusual voice characteristics may find
difficulty in achieving high accuracy with speaker independent Voice Command, so
9.
the Adapt Voice feature allows users to dramatically improve the recognition accuracy
after adapting their voices. Users who get acceptable recognition accuracy will find no
additional benefit to performing the Adapt Voice.
1. From idle mode, press the OK Key to unlock the keypad, press the
OK Key [MENU], swivel to the QWERTY keypad and press
& Tools, 2. Tools, 1. Voice
2. Press the Right Soft Key
3. Select
1. Train Voice or
9. Settings
Commands.
[Settings], 2. Sensitivity.
Automatic or Less Sensitive, then press the
9. Settings
Commands.
[Settings], 3. Adapt Voice.
2. Reset Voice, then press the OK Key.
Menu Function − Chapter 4
73