Tabla de contenido
Publicidad
OmniSwitch 2220 Hardware Guide
Standards Compliance
The product bears the CE mark. In addition it is in compliance with the following other safety and EMC
standards.
Note: All hardware switching modules used in an OmniSwitch switch comply with Class A standards. Modules
with copper connectors meet Class A requirements using unshielded (UTP) cables.
Safety Standards
•
US UL 60950-1
•
IEC 60950-1 Health and Safety
•
CAN/CSA-C22.2 No. 60950-1-03
•
NOM-019 SCFI, Mexico
•
AS/NZ TS-001 and 60950:2000, Australia
•
UL-AR, Argentina
•
UL-GS Mark, Germany
•
CU, EAC, Russia
•
EN 60825-1 Laser
•
EN 60825-2 Laser
•
CDRH Laser
•
IEC 60950-1/EN 60950 with all country deviations
•
IEC 60950-1:2005, Second Edition
•
CCC, China
•
ANATEL, Brazil (Contact for availability)
•
BSMI, Taiwan (Contact for availability)
•
KCC, Korea (Contact for availability)
In compliance with UL/EN/IEC 62368-1: This equipment is not suitable for use in locations where children are
likely to be present.
EMI/EMC Standards
•
FCC Part 15:2012, Subpart B, Class A
•
ICES–003:2012 Issue 5, Class A
•
ANSI C63.4-2009
•
FCC CRF Title 47 Subpart B (Class A)
•
VCCI (Class A)
•
AS/NZS 3548 (Class A)
•
CE marking for European countries (Class A)
•
EN 55032 (EMI & EMC)
•
EN 61000-3-2
•
EN 61000-3-3
•
EN 55024 (Immunity)
• EN 61000-4-2
Alcatel-Lucent Enterprise
April 2018 • 060524-10 Rev. A
Regulatory Compliance and Safety Information
OmniSwitch 2220 Hardware Guide
Page 15
Publicidad
Tabla de contenido
