Connecting With A Bluetooth Device - ION Audio HOUSE PARTY Guia De Inicio Rapido

5. Power LED: Indicates whether HOUSE PARTY is on or
off.
6. Light Mode: There are three modes to select from for
how the strobe lights react to the music.
•
Beat = the light reacts to the beat of the music.
•
Party = dome light spins and changes color whether
there is music playing or not.
•
Off = the light is off and the lights in the dome are
not spinning.
7. Dome: The lights in the dome can spin and react to the
music playing (depending on the Light Mode that is
selected).
8. Power Adapter Input: Insert the included power
adapter here to power the unit.
9. Power ON/OFF Switch: Turns HOUSE PARTY on
or off.
10. Fans: These air intake and air outtake vents operate
when Light Mode is turned on to ensure the light
dome operates efficiently.
Note: Please ensure these vents do not get covered
or blocked.
Troubleshooting
If the sound is distorted: Try lowering the volume control of your sound source or musical instrument. Also,
try to reduce the overall volume of HOUSE PARTY.
If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass
level. This will allow you to play the music louder before clipping (distortion) occurs.
If there is a high-pitched whistling noise when using microphones: This is probably feedback. Point the
microphone away from the speaker.
If you can't hear the microphone over the music volume: Turn down the music volume from your source.

Connecting with a Bluetooth Device

1. Turn on HOUSE PARTY using the power switch.
2. Navigate to your Bluetooth device's setup screen, find "ION Speaker" and connect.
Note: The next time you approach HOUSE PARTY with your Bluetooth device, it will automatically re-
connect.
Note: If your Bluetooth device prompts for a pairing code, enter '0000'.
3. If your Bluetooth device is not able to connect to HOUSE PARTY, press the Bluetooth Disconnect
button on HOUSE PARTY to break previous Bluetooth connections and reset the Bluetooth module.
Note: Maximum range will be achieved when using devices with Bluetooth 4.0.
4. The Paired LED will light up solid when it is 'paired'.
5. Start music playback from your Bluetooth device.
6. To connect to another Bluetooth device, press the Bluetooth Disconnect button. Repeat Step 2.
7. To disconnect a connected Bluetooth device, press the Bluetooth Disconnect button.
Note: If you experience trouble connecting or playing music, update your device's OS.
1
9
4
7
2
3
5
4
10
8
6