Safety Symbols - Ego Power+ BA2240 Manual De Instrucciones

safetY sYmbols

The purpose of safety symbols is to attract your attention to possible dangers. The
safety symbols and the explanations with them deserve your careful attention and
understanding. The symbol warnings do not, by themselves, eliminate any danger. The
instructions and warnings they give are no substitutes for proper accident prevention
measures.
WARNING:
Operator's Manual, including all safety alert symbols such as "DANGER," "WARNING,"
and "CAUTION" before using this tool. Failure to following all instructions listed below
may result in electric shock, fire, and/or serious personal injury.
WARNING:
qualified service technician.
WARNING:
thrown into your eyes, which can result in severe eye damage. Before beginning power
WARNING:
100 °C (212 °F), or incinerate. Keep battery out of reach of children and in original
package until ready to use. Dispose of used batteries promptly according to local
recycling or waste regulations.
Be sure to read and understand all safety instructions in this
To ensure safety and reliability, all repairs should be performed by a
The operation of any power tools can result in foreign objects being
tool operation, always wear safety goggles or safety glasses with
side shields and a full face shield when needed. We recommend a
Wide Vision Safety Mask for use over eyeglasses or standard safety
glasses with side shields. Always use eye protection which is marked
to comply with ANSI Z87.1.
Risk of fire and burns. Do not recharge, disassemble, heat above
56V BATTERy 4.0Ah/56V BATTERy 2.0Ah — BA2240/BA1120
5