Installation Instructions; Space Requirements - Kenmore 68610 Guia Del Usuario

Installation Instructions
Space requirements
NOTE: There must be at least one wall stud within
cabinet opening.
Check the opening where the microwave
oven hood will be installed. The location must
provide:
• 2 inch x 4 inch wood studding and % inch
thickness drywall or plaster lath
• Support for microwave oven hood weight of
150 pounds plusthe weight of items placed in
the oven or upper cabinet
• 30 inch wide minimum opening
• t3V2" inch clearance betweenthe bottom of micro-
wave oven hood and the cooktop
• Protection from draft areas, such as windows,
doom, and strong heating vents
• Grounded electrical outlet (see "Electrical
requirements" in the "Microwave Oven
Safety" section)
66" rain. Exhaustoutlet
mounting connectsto
heightfrom 30" min. 31/_"x10"
floor width required duct
""231Aa " door
open
Shipped ready for ventless (recirculating) operation,
converts to b)p or rear discharge,
14
CRITICAL DIMENSIONS
30" min. from cooking surface
(or countertop) below microwave oven
to top of wall mounting bracket
131/2"rain. to cooking surface
(or countertop) below microwave oven
r,=========