Deep Steam; Washing Clothes Using The Cycle Selector - Samsung WF405ATPA Serie Manual De Instrucciones

DEEP STEAM
DEEPSTEAM (Magic Steam)
The Deep Steam feature boosts cleaning performance and loosens grime and dirt, providing superior
cleaning results.
For heavily soiled, colorfast garments, this cycle provides a high washingtemperature and steam and is
effectivefor cleaning stains.
How DEEPSTEAMworks
Ifyou select steam, the steam acts at the most effectivetimes for the detected amount of laundry,
maximizingthe effect of the steam, increasingthe wash temperature, enhancing the Soak effect, and
improving wash performance.
PressSteam button to use the Steam Wash function. Steam Wash is availablewith the Normal, Heavy
Duty, Bedding PLUS, Sanitize,Stain Away and Deep Steam cycles. For heavilysoiled, colorfast garments,
Steam Wash improves stain treatment and uses lesswater.
Washer takes small amounts of water intub and Heater heats water into evaporation.
To use the Steam function, perform the following steps:
1. Load the washer.
2. Pressthe Power button.
3. Turnthe Cycle Selector and select a Steam Cycle. (The Deep Steam course automatically selects
Steam.)
4. Pressthe Steam button.
5. Add detergent to the dispensertray and add fabric softener up to the marked line.
6. Pressthe Start/Pause button.
The washer automatically selects the optimal wash conditions by sensing the weight of the laundry.
The steam may not be visibleduring the Steam cycle, and may also not always be visiblewhile the
total steam cycle is being performed.
This is normal.
Z_ * Too much steam could damage clothing. Do not use steam with delicate fabrics such as wool, silk
....... or easilydiscolored fabrics.
Steam may not be present during entire steam wash cycle.
Do not touch the door. The door surface can become very hot.
Washing clothes using the cycle selector
Your new washing machine makes washing clothes easy, using Samsung's "Fuzzy Control"
automatic control system. When you select a wash program, the machine will set the correct
temperature, washing time, and washing speed.
1. Turn on your sink's water tap.
2. Press the Power button.
3. Open the door.
4. Load the articles of clothing one at a time loosely into the drum, without overfilling it.
5. Close the door.
6. Add detergent, softener, and pre-wash detergent (if necessary) into the appropriate
compartments.
Pre-wash is only available when selecting the Eco Cold, Normal, Heavy Duty, Perm Press,
Sanitize, Stain Away, Deep Steam, Active Wear and Bedding PLUS cycles. It is only
necessary if your clothing is heavily soiled.
26 washng a cad of aundry