Using Steam Wash; Atc (Auto Temperature Control) - Samsung WF405ATPA Serie Manual De Instrucciones

Ocultar thumbs Ver también para WF405ATPA Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2, Use the Cycle Selector to select the appropriate cycle according to the type of material:
Normal, Heavy Duty, Perm Press, Sanitize, Bedding PLUS, Deep Steam, Stain Away,
Active Wear, Delicates/Hand Wash, Wool, Quick Wash, Rinse+Spin, Eco Cold. The relevant
indicators will illuminate on the control panel.
8, At this time, you can control the wash temperature, the number of rinse cycles, the spinning
speed, and the delay time by pressing the appropriate option button.
9, Press the Start/Pause
button on the Cycle Selector and the wash will begin. The process
indicator will light up and the remaining time for the cycle will appear in the display.
Pause Option
1, When the "Garment+_+"
light is ON, you can add or remove laundry items.
2. Press the Start/Pause
button to unlock the door.
You cannot open the door when the water is too HOT or the water level is too HIGH.
3, After closing the door, press the Start/Pause
button to restart the wash.
USING STEAM WASH
If you select steam, the steam acts at the most effective times for the detected amount of laundry,
maximizing the effect of the steam, increasing the wash temperature, enhancing the Soak effect, and
improving wash performance.
1. Load the washer.
2. Press the Power button.
3. Turn the Cycle Selector and select a Steam Cycle. (The Deep Steam course automatically selects
Steam.)
4. Press the Steam button.
5. Add detergent to the dispenser tray and add fabric softener up to the marked line.
6. Press the Start/Pause
button.
: The washer automatically selects the optimal wash conditions by sensing the weight of the laundry.
_
team may not necessarily be visible during the steam cycles. Steam may not be present during the
entire steam wash cycle.
ATC (AUTO TEMPERATURE
CONTROL)
ATC is the control function that the washer controls water temperature with temperature sensor (thermistor).
_
ecause there are numerous water temperatures depending on the customer's environments(cold
areas, warm areas, various water temperature, settings of heater temperature, etes), ATC function in
our washer maintains the certain level of wash temperature to output the best washing performance at
each cycle.
lf you select normal & heavy duty course, those courses are the regulation and UL course. Since new
washer must reduce the amount of energy usage at first priority, customer will notice more cold water
entering the washer. But This is Normal, not a problem.
ln those regulation course, Hot temperature is similar to acceptable adult bath-water temperature and
warm temperature is similar to comfortable swimming-pool
water temperature.
If customer want to wash clothes in specific water temperature, customer should choose a different
course at each temperature(Hot/Warm/Eco
Warm)
wash nq a oad of aundrv
27

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Wf397utpa serieWf398atpa serie

Tabla de contenido