AVE 45184/M Manual De Instrucciones página 28

– stain-remover
– paint thinner
– furniture polish
– excessive amounts of water steam
Should one of the above-mentioned substances set off the alarm, ventilate the area invol-
ved, and restore the sensor to normal conditions. These substances could jeopardize the
reliability of your detector.
Do not carry out any test by opening the gas tap
LIMITATIONS TO THE USE OF THE DETECTOR
– The detector cannot operate without power supply which can stop, for exam-
ple, in case of a power cut, fire, if a fuse blows or an circuit breaker trips, or in
the case of a wrong connection.
– The detector's alarm will not be activated if the gas cannot reach the sensor.
Any kind of obstruction of the path of the gas to the sensor may prevent the
alarm from being triggered or delay its activation. Gas may be smelled before
the alarm starts.
– A gas detector cannot detect gas inside walls, floor or in the ceiling unless a
significant amount of gas reaches the detector.
27