Medline Evencare G2 Guía De Usuario página 47

Wipe all external areas of the meter or lancing device including both
front and back surfaces until visibly clean. Avoid wetting the meter test
strip port. Allow the surface of the meter or lancing device to remain wet
at room temperature for the contact time listed on the wipe's directions
for use.
5. Wipe meter dry or allow to air dry.
6. Wash hands with soap and water and dry thoroughly.
NOTE:
• If the meter or lancing device is being operated by a second person
who is providing testing assistance to the user, the meter or lancing
device should be disinfected prior to use by the second person.
• Keep disinfecting wipes out of reach of children and stored according
to their instructions.
• Do not flush disinfecting wipes down toilet.
IMPORTANT:
If you notice any of the below signs after cleaning and disinfecting your
meter or lancing device; stop using the device and call Medline
Technical Service immediately at 1-866-274-2131:
• Control solution out of range.
• Clouding meter LCD display.
• Corrosion or erosion of plastic housing or buttons.
• Cracking of plastic housing.
• Malfunction of any meter button.
Caring for the Meter
2
EVENCARE G
47