Publicidad
A
B
A
2
NVM/300
NVM/301
B
C
NVM/301
NVM/300
D
E
B (telaio BPT) (kit NS/61)
D (1 adattatore copriforo BPT da 8,5
mm) (kit NS/61)
E (placca)
- Placca VIMAR serie Plana art. 14657
(fig. 9)
A (scatola incasso)
B (telaio BPT) (kit NS/61)
C (2 adattatori
copriforo BPT da 8,5
mm) (kit NS/61)
D (1 adattatore copriforo BPT da 8,5
mm) (kit NS/61)
E (placca)
- Placca GEWISS serie Playbus art.
GW320...6 o Playbus Young art.
GW323...6, placca VIMAR serie Idea
art. 1673(4)6 o Idea Rondó art.
1675(6)6, placca AVE serie Sistema
45 art. 45P06 (fig. 9)
A (scatola incasso)
B (telaio BPT) (kit NS/61)
C (2 adattatori
copriforo BPT da 4,5
mm) (kit NS/61)
D (1 adattatore copriforo BPT da 8,5
mm) (kit NS/61)
E (placca)
5
ATTENZIONE.
Quando vengono utilizzate:
- Placche BTICINO (serie Living Inter-
national o Light) eliminare gli agganci
1 e 3 indicati in fig. 10;
- Placche BTICINO serie Matix elimina-
re gli agganci 1-2-3 indicati in fig. 10;
- Placche GEWISS serie Playbus elimi-
nare gli agganci 1-2-3-4 indicati in fig.
10;
- Placche GEWISS serie Playbus Young
eliminare gli agganci 2 e 4 indicati in
fig. 10;
- Placche VIMAR serie Plana eliminare
l'aggancio 1 indicato in fig. 10.
SMALTIMENTO
Assicurarsi che il materiale d'imballag-
gio non venga disperso nell'ambiente,
ma smaltito seguendo le norme vigenti
nel paese di utilizzo del prodotto.
Alla fine del ciclo di vita dell'apparec-
chio evitare che lo stesso venga di-
sperso nell'ambiente.
Lo smaltimento dell'apparecchiatura
deve essere effettuato rispettando le
norme vigenti e privilegiando il riciclag-
gio delle sue parti costituenti.
6
Sui componenti, per cui è previsto lo
smaltimento con riciclaggio, sono ripor-
tati il simbolo e la sigla del materiale.
INSTALLATION
GB
INSTRUCTIONS
NVM/300 COLOUR
MONITOR MODULE
Colour monitor to be used in conjunc-
tion with the hands-free module NC/321
in series 300 video entry control instal-
lations.
It can be inserted, combined with the
hands-free module in a standardised
double embedding box, or on its own in
a standardised rectangular single em-
bedding box.
The unit comes with a chassis and
adapters for the use of a number of
commercially available front plate mod-
els.
It features the following controls (fig. 1):
7
Brightness
Saturation colour
Entry panel activation
•
Centralized control (stairs light
and entry panel selection)
Function of each terminal (fig. 2)
Terminal block M1
12÷16 V AC, 14÷18 V DC
monitor supply voltage
Function of jumper SW1
Normally supplied with jumper inserted
(ON) to apply resistive load termination
on the line (fig. 2).
Remove the jumper if the line contin-
ues.
Function of connector CN1
(Connection to the audio module
NC/321)
Connect monitor module to audio mod-
ule with the relevant cable supplied
(fig. 2).
Technical features
• Video signal system: PAL.
• Display: 2" colour LCD Poly-Silicon
TFT.
• Resolution: 862x240 dots.
• Supply voltage: 12÷16 V AC, 14÷18 V
DC.
• Current demand: max. 220 mA (5 mA
in stand-by).
• Working temperature range: from 0 °C
to +35 °C.
Installation
The monitor module can be installed
teamed with twin-channel module
NC/321 in an embedding box (fig. 4),
or on its own teamed with the twin-
channel module (fig. 3).
In the latter case, the distance between
the modules will depend on the length
(24 cm) of the cable supplied.
Recess the embedding box flush with
the wall at a suitable height for the user.
WARNING. To remove the monitor mod-
ule from the chassis, lift the locking
clips and push from the rear (fig. 5).
Examples of assembly of the NVM/300
monitor module in a standardised single
embedding box with a number of com-
mercially available front plates:
- BTICINO Living series art. L4803 or
Light series art. N4803 front plate, VI-
MAR Plana series art. 14653 front
plate (fig. 6)
A (embedding box)
B (front plate)
- VIMAR Idea or Rondó series front pla-
te, AVE System 45 front plate (fig. 7)
A (embedding box)
B (adapter for VIMAR plate)
C (adapter for AVE plate)
D (BPT hole plug adapter)
E (front plate)
- GEWISS Playbus series front plate
(fig. 8)
A (embedding box)
B (BPT hole plug adapter without con-
necting rods)
C (front plate)
Examples of assembly of the NVM/300
monitor module in a standardised dou-
ble embedding box combined with the
hands-free module NC/321, with a num-
ber of commercially available front
plates:
Publicidad
