Ecco 5280 Serie Manual De Instalación E Mantenimiento

The 5280 Series RotoLED™ Minibar combines all the ben-
efits of the latest LED's with the unmistakable warning signal
of a rotator, without compromising reliability. LED hybrid
technology uses a brushless hybrid stepper motor to spin
the reflector disk, reducing noise and eliminating the typical
motor/gear drawbacks associated with conventional rotators.
Each hybrid module features eight 3-watt LED's and TIR
optic to provide SAE J845 Class 1 light output. Additional
benefits include an extended, service free life, low amp draw
and a 5 year warranty.
IP67, , SAE J845, ECE R10, R65 (BLUE ONLY)
c
!
WARNING!
Failure to install or use this product according to manufacturers recommendations may result in property
damage, serious bodily/personal injury, and/or death to you and those you are seeking to protect!
Do not install and/or operate this safety product unless you have read and understand the
safety information contained in this manual.
1. Proper installation combined with operator training in the use, care, and maintenance of emergency warning devices
are essential to ensure the safety of you and those you are trying to protect.
2. Exercise caution when working with live electrical connections.
3. This product must be properly grounded. Inadequate grounding and/or shorting of electrical connections can cause high
current arcing, which can cause personal injury and/or severe vehicle damage, including fire.
4. Proper placement and installation are vital to the performance of this warning device. Install this product so that output
performance of the system is maximized and the controls are placed within convenient reach of the operator so that
s/he can operate the system without losing eye contact with the roadway.
5. It is the responsibility of the vehicle operator to ensure during use that all features of this product work correctly. In use,
the vehicle operator should ensure the projection of the warning signal is not blocked by vehicle components (i.e., open
trunks or compartment doors), people, vehicles, or other obstructions.
6. The use of this or any other warning device does not ensure all drivers can or will observe or react to a warning signal.
Never take the right-of-way for granted. It is your responsibility to be sure you can proceed safely before entering an
intersection, driving against traffic, responding at a high rate of speed, walking on or around traffic lanes.
7. This equipment is intended for use by authorized personnel only. The user is responsible for understanding and obeying
all laws regarding warning signal devices. Therefore, the user should check all applicable city, state, and federal laws
and regulations. The manufacturer assumes no liability for any loss resulting from the use of this warning device.
920-0098-00 Rev. C
Installation and Operation Instructions
5280 Series LED Hybrid Minibars
Page 1 of 4