Connections; Connecting To Tv & Vcr - Zodiac Free-To-Air DZR-1700FTA PLUS Manual De Empleo

Connections

Install the receiver in horizontal position.
Do not put any heavy stuff such as a TV on the receiver.
Do not install the receiver in the place as follows: Vibrating, direct sunrays,
humid place, too high or low temperature, and no ventilated place.
3.1 Connecting to TV & VCR
Receiver to TV with RF
1. Connect the TV antenna to RF-IN.
2. Connect the RF-OUT of Receiver to RF-IN of TV.
3. Connect the Video and Audio of TV to the Video and Audio.
4. Go to section 3.2 Connecting to Dish then connect your dish.
Receiver to TV and VCR with RF
1.Connect the TV antenna to RF-IN.
2.Connect the RF-OUT of receiver to RF-IN of VCR.
3.Connect the RF-OUT of VCR to the RF-IN of TV.
4.Connect the Video and Audio of TV to the Video and Audio of receiver.
5.Go to section 3.2 Connecting to Dish, then connect your dish.
10