CoCo SLV control ICS-1000 Guía De Instalación Rápida página 12

4. The screen of the selected 5. By pressing the plus button, you
room will be shown, with the All off can add a device. Enter a desired
command added automatically. name and press OK.
6. WIRELESS CONTROL
In the previous chapter you read the
following:
•
create a room
•
add device to a room
•
connect a SLV receiver with
your 470801
Repeat these steps to add more
rooms and/or devices.
Each type of device has its own set
of buttons, for example on/off or
open/close.
If you are using a dimmer you can
dim the light with the slider.
10. You are now able to control
the device wirelessly with the
corresponding green buttons.
6. Now select the device type
(corresponds with your SLV receiver).
Use Open Close for the ASUN-650.
14 14
16 16
7. The device will now be shown 8. Activate the learn mode of the
with a CONNECT button. Press corresponding SLV receiver
this button. (see receiver's manual).
To control these device also on
another smartphone/tablet you
need to save your settings to our
webserver.
This can be done by going to
"Settings" and pressing "Save settings
to web server".
On a another Android
smartphone/tablet you can simple
get these settings by pressing "Get
settings from web server".
To use these settings on an iPhone
or iPad you need to press "Download
database from Web" in your iOS app.
Each time you make an adjustment
remember to save these adjustments
by pressing "Save settings to
webserver".
11
1 sec.
9. When the LED indicator of the
receiver blinks, press OK. The
receiver will now save the signal.
15 15
Connected to Web Server
17 17