General Safety Rules - TCE 44008 Manual Del Usuario

GENERAL SAFETY RULES

WARNING:
may result in serious injury.
CAUTION:
Do not allow persons to operate or assemble these jack stands until they have
read this manual and have developed a thorough understanding of how the jack stands work.
WARNING:
cannot cover all possible conditions or situations that could occur. It must be understood by the
operator that common sense and caution are factors that cannot be built into this product, but must be
supplied by the operator.
IMPORTANT SAFETY CONSIDERATIONS
JACK STANDS USE AND CARE

Do not modify the jack stands in any way. Unauthorized modification may impair the function
and/or safety and could affect the life of the equipment. There are specific applications for which the
jack stands were designed.

Always check of damaged or worn out parts before using the jack stands. Broken parts will
affect the jack stands operation. Replace or repair damaged or worn parts immediately.

Store idle jack stands. When jack stands are not in use, store them in a secure place out of the
reach of children. Inspect it for good working condition prior to storage and before re-use.
WARNING! NEVER use automotive jack stands to support both ends, or one side of a vehicle!
WARNING! NEVER use on jack stands on a lawn mower or lawn tractor.
Use only 1 pair per vehicle. Rated capacity is per pair only!
INSPECTION

Inspect the jack stands carefully before each use. Ensure the jack stands are not damaged,
excessively worn, or missing parts.

Do not use if components are bent, broken or cracked.

Using jack stands that is not in good clean working condition may cause serious injury.

Inspect the work area before each use. Make sure it is free and clear of any potential hazards.
WARNING: The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions or situations that could occur. It must be understood by the
operator that common sense and caution are factors that cannot be built into this product, but must be
supplied by the operator.
Read and understand all instructions. Failure to follow all instructions listed below
The warnings, cautions, and instructions discussed in this instruction manual
SAVE THESE INSTRUCTIONS
3