Description Of The Appliance; Installation - Airon IAT-604AEH1 Manual Del Usuario

DESCRIPTION OF THE APPLIANCE

1. Rear left hot plate ,Ø180mm
2. Panel
3. Rear right hot plate ,Ø145mm
4. Front right hot plate, Ø180mm
5. Red indicating light of operation
6. Rear right hot plate control knob
7. Front right hot plate control knob
8. Front left hot plate control knob
9. Rear left heating plate control knob
10. Front left hot plate, Ø145mm

INSTALLATION

INSTALLING THE COOKER HOB:
The kitchen area should be dry and aired and equipped with e cient ventilation. When installing
the cooker hob, easy access to all control elements should be ensured.
This is a Y-type design built-in cooker hob, which means that its back wall and one side wall can be
placed next to a high piece of furniture or a wall .Coating or veneer used on tted furniture must
be applied with a heat-resistant adhesive (100 º ). This prevents surface deformation or
detachment the coating.
Hoods should be installed according to the manufacturer's instructions.
1. ASSEMBLY OF ELECTRIC HOB:
Making an hole with the dimensions given in the diagram for the hob to be mounted on the
worktop;
Check seal for perfect t and overall cover. Lower the electric hob into place and align correctly.
Using a standard screwdriver, tighten the tension clamps evenly starting at the centre and moving
diagonal, until the built-in rim is tight on the worktop.
3