Preparations; Canceling The Demonstration Mode; Adjusting The Clock - Kenwood KDC-X998 Guia De Inicio Rapido

Preparations

[SRC]
[ 1 / 6 ]
Release
Canceling the Demonstration
mode
Cancel the Demonstration mode when
you use the unit for the first time after
installation.
1
Press [Control] knob to cancel the
Demonstration mode when the message
"To cancel DEMO Press the volume knob"
appears (approx. 15 seconds).
2
Turn [Control] knob to select "YES", and
then press [Control] knob.
The Demonstration mode can also be
canceled in the Function Setting mode.
Refer to <14-4. Demonstration mode
setting> in Instruction manual
4 | Quick Start Guide
[Control] knob (Volume knob) FRONT USB terminal
REAR USB terminal

Adjusting the clock

1
Press [Control] knob to enter the
Function setting mode.
The item can be selected and
determined as follows.
"Settings" Á "Clock & Date" Á "Clock
Adjust"
Turn [Control] knob to select the item,
and press [Control] knob.
2
Turn [Control] knob to adjust the hour,
and then press [Control] knob.
3
Turn [Control] knob to adjust the
minute, and then press [Control] knob.
4
Press and hold [ 1/6] to exits the
Function setting mode.