Detaching The Soundbar From The Wall; Software Update - Samsung HW-M450 Manual De Instrucciones

Detaching the Soundbar from
the Wall
1. To separate the Soundbar from the wall
mount, push it in the direction of arrow, tilt it
up slightly, and then pull it away from the
wall as shown.
• Do not hang onto the installed unit and avoid
striking or dropping the unit.
• Secure the unit firmly to the wall so that it
does not fall off. If the unit falls off, it may
cause an injury or damage the product.
• When the unit is installed on a wall, please
make sure that children do not pull any of the
connecting cables, as this may cause it to fall.
• For the optimal performance of a wall mount
installation, install the speaker system at
least 5 cm below the TV, if the TV is mounted
on the wall.
• For your safety, if you do not mount the unit
on the wall, install it on a secure, flat surface
where it is unlikely to fall.
10 SOFTWARE
UPDATE
Samsung may offer updates for the Soundbar's
system firmware in the future.
Micro USB to
USB adapter Cable
(not supplied)
If an update is offered, you can update the
firmware by connecting a USB device with the
firmware update stored on it to the USB port on
your Soundbar.
For more information about how to download
update files, go to the Samsung Electronics
website at (www.samsung.com  Support).
Then, enter or select the model of your Soundbar,
select Software & Apps, and then Downloads.
The option name can vary.
ENG - 29
USB port
DIGITAL AUDIO IN HDMI IN
(OPTICAL)
DC 24V DC 24V
USB (5V 0.5A)
HDMI OUT
(TV-ARC)
AUX IN
USB (5V 0.5A)