•
The Surge Protector must be plugged into a grounded (3-prong) outlet
NOTICE
that is within 5 feet of the Fence Transmitter. ALWAYS use a grounded
(3-prong) outlet to ensure maximum protection.
•
Cutting or removing the 3rd prong from the Surge Protector or using
a 3-prong plug to 2-prong outlet converter will render the protector
ineffective against surges or spikes.
•
Verify the boundary and transmitter wires are connected to the proper
Surge Protector terminals. Damage to both the LP-4100 and your wall
transmitter can occur if connections are reversed.
•
For added protection for the Fence Transmitter when unused for
long periods of time or prior to thunderstorms, disconnect the Loop
Boundary Wires and unplug the Power Adapter from the AC outlet.
4
Customer Care Center 1-800-732-2677