Installation; Connect The Transmitter To Your Computer; Connect The Receiver To The Hdtv Set - Philips SWW1890 Manual Del Usuario

4 Installation

Connect the transmitter to
your computer
a
b
Connect the transmitter to the computer using
the supplied USB cable.
1
Connect the transmitter to the HDMI port
of the computer.
2
Connect the small end of the USB cable to
the POWER jack of the transmitter;
c
3
Connect the other end of the USB cable
to your the USB port of your computer.
Note
‡
For some computers, the HDMI and USB ports are
located in different sides of the computer.
» The power LED indicator of the
WUDQVPLWWHU ÁDVKHV LQ EOXH WKHQ WXUQV
into solid blue when the connection is
established.
Connect the receiver to the
HDTV set
HDMI
1
Connect the receiver with the supplied
HDMI cable:
‡ Connect one end of the HDMI cable
to HDMI OUT connector of the
receiver.
‡ Connect the other end of the HDMI
cable to the HDMI in connector of
your HDTV.
2
Connect the power adapter to the
receiver with the supplied power adapter:
‡ Connect one end of the power
adapter to the DC IN connector of
the receiver.
‡ Connect the other end of the power
adapter to a power socket.
EN 9