Working And Settings; Start; Select The Input Source - Steren PRO-110 Manual De Instrucciones

WORKING AND SETTINGS

The show images in this manual are only reference. The interface may
change by updates in the system.

Start

Press the On / Off button in the remote control or direct in the projector

Select the input source

Press the INPUT key in the remote control to enter to Input source.
26
Use the displacement ◄ ▲ ► ▼buttons to select the option that correspond
with the device that you have connected to projector. Then, press to confirm.
Also you can select the correspond button to select the source directly in the
projector.