Responsibility Of The Costumer; Filter Function; Assigned Use; Construction - Vizion HRS-100 Manual De Instalación Y Operación

Sistema de filtro para la optimización de aqua otable
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

All recommendations and data in this manual are given under consideration of the actual regulations
and requirements, state of the art, as well as, our experience in the field of water filtration and
technology.
This warranty does not include primary and secondary damage caused by:
disregarding instructions given in the installation and operation manual
 
misusage of the filter system
 
inappropriate or wrong installation
 
inappropriate operation
 
unauthorized modifications of the system
 
technical changes
 
usage of non certified parts
 
3.4
Responsibility of the Consumer
The installation and operation manual must be stored close to the filter system, accessibility must
 
be available at any time
Operation of the filter system should only be carried out under technically correct and safe conditions
 
Comply according to the instructions given in this installation and operation manual
 

4 Filter Function

4.1

Assigned Use

The VIZION HRS filter system is designed exclusively for the intended purpose described in this manual:
VIZION HRS filter Cartridges are used for the decarbonization of cold water fulfilling the legal
 
requirements for drinking water.
Lime* and carbonate hardness* are reduced. The devices connected to the filter system, mainly
 
equipment used in gastronomy (e.g. coffee machine, espresso machine, hot-/coldwater machine,
steamer, combi steamer, ice machine), are protected against lime scale.
Furthermore, substances responsible for taste and odor (e.g. chlorine), are removed.
 
Particles* are also removed by the filter system.
I
Risks of misusage!
Any other use than the intended use outlined in this manual for the VIZION HRS filter system is strictly
prohibited by the manufacturer and does exclude any and ALL liabilities and warranty of the manufacturer
4.2

Construction

Flow diagram (Fig.2).The tap water is entering the filter cartridge (A). In section
(E) particles are removed by a pre filter and substances responsible for taste and
odor (e.g. chlorine) are removed by activated carbon. Afterwards the
decarbonisation is done by ion exchange in section (F). Finally, the water is
treated by activated carbon (G) and particles are removed by a filter (H).
Within the filter system there is an integrated blend unit (B). With this unit the
system is capable doing a part decarbonisation means a defined amount of tap
water can blend without decarbonization but this proportion of water must also
pass the activated carbon (G) and particle filter (H). In section (D) both flow rates
(decarbonisation and blend) are mixed together.
A Inlet tap water
B Blend water
C Blend setting on the filter head
D Outlet filtered water
E Pre - Filtration (particles, activated carbon)
* Not performance tested and certified by NSF
F Decarbonisation based on ion
exchange
G Filtration with activated carbon;
including blend water
H particle filtration; including blend
water
5
Fig. 2

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Hrs-200

Tabla de contenido