Duplex VARIOspeed 3R Manual Del Usario página 12

Viewing Log
Viewing Pump Motor Run Time
Pump Motor Run Time
Pump 1
Pump 2
The accumulated run time of the motor can be viewed by accessing the View Run Time screen in the setting menu. The
run time is displayed in total hours run.
Viewing VFD Fault History
VFD OVERLOAD TRIP
STALL PREVENTION
VFD OVERLOAD TRIP
VFD OVERLOAD TRIP
The VFD fault history of each VFD can be viewed by accessing the VFD1/VFD2 Fault History screen in the settings
menu. The last eight faults of each VFD can be viewed by scrolling through the Fault History screen, with the most
recent faults first. If a fault is currently active, the fault will flash on the main screen.
Viewing System Fault Log
- - Time Since Fault - -
HPress
RunDry
ShdnIn
The System Fault Log can be viewed by accessing the View Sys Fault Log screen in the settings menu. The System
Fault Log shows the length of time since a HIGH PRESSURE CONDITION, RUN DRY CONDITION, SHUTDOWN INPUT,
PUMP1 SENSOR, or PUMP2 SENSOR FAILURE occurred. Rotating the dial allows the user to scroll through the System
Fault Log. If no fault has occurred, the "No Faults" message is shown.
12
1234567 hours
1234567 hours
42d 16:23:42
No Faults
No Faults
VARIOspeed 3R Duplex User Manual
®