General Specifications - Tornado 98451 Manual De Operaciones Y Mantenimiento

General Specifications

The Quad External Head Assembly is a heavy duty wet/dry industrial vacuum. It will pick up wet or
dry waste simultaneously without the need to change any filters. This compressed air vacuum has
no moving parts and has tremendous suction for a portable unit. It is designed to fit onto a 55-gallon
rolled top steel drum (Tornado # 95944) for volume pick¬up with maximum efficiency. Virtually all dry
and liquid recovered products go into the drum, therefore maintaining peak performance. It handles
a wide variety of waste, ranging from fine powders to heavy-grade viscosity products. Designed to
perform at maximum efficiency with 1.5" and 2" hoses and attachments
Unit Speci ications
98451 INCLUDES:
Quad Head Jumbo Cover and Venturi Powerhead Assembly w/ Liquid Shut-off (External Filter)
90488 Large Poly External Filter (2)
95995 Support Rod for Large Filter (2)
90442 Deflector (attached to Jumbo Cover)
90332 2" Jumbo Hose Connector - Adapter
90324 2" X 16' Neoprene Hose
90683 2" Steel Wand (two-piece) Tool
90317 2" X 22" Squeegee Tool
90320 2" X 12" Floor Gulper Tool "
90444 2" X 18" Round Nozzle Tool
EXTERNAL FILTER AREA
HORIZONTAL RECOVERY (reach)
VERTICAL RECOVERY (lift)
REQUIRED COMPRESSOR
AIR LINE AND COUPLINGS
HOSE ADAPTOR
WEIGHT
3/16" JET (installed) w/1.5" HOSE
3/16" JET w/2" HOSE
COMPRESSOR CFM
7/32" JET (included) w/1.5" HOSE
7/32" JET w/2" HOSE
COMPRESSOR CFM
1/4" JET (included) w/1.5" HOSE
1/4" JET w/2" HOSE
COMPRESSOR CFM
Features.
• Capable of simultaneous wet/dry pickup when using external filter(s).
• 3/16" (5mm) jets installed. 7/32" (5.5mm) and 1/4" (6mm) jets are included for heavier debris.
• Ideal for materials from powder to oily metal chips, grindings and shavings.
• Recovers fluids from water to heavy weight oils.
• External filter(s) collect lighter particles and resist clogging.
• A heavy duty 55-gallon rolled top drum is required, and is available from Tornado.
1874 sq. in. (Per Head)
100 ft.
50 ft.
50 h.p.
1" required
2" Included
79 lbs.
185 CFM/154" Static Waterlift
250 CFM/154" Static Waterlift
94 (a) 90 p.s.i.
210 CFM/170" Static Waterlift
244 CFM/170" Static Waterlift
122 @ 90 p.s.i
231 CFM/200" Static Waterlift
238 CFM/200" Static Waterlift
152 @ 90 p.s.i.
4