Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
6. M
AINTENANCE
Product
Maintenance
7. T
ECHNICAL
Dimensions and
Weight
Power
Thermal
DMX
Ordering
Page 22 of 88
Dust build-up reduces performance and can cause overheating. This can lead to
reduction of the product's life and/or mechanical wear. To maintain optimum
performance and minimize wear, clean your lighting products at least twice a month.
However, be aware that usage and environmental conditions could be contributing
factors to increase the cleaning frequency.
To clean the product, follow the instructions below:
1.
Unplug the product from power.
2.
Wait until the product is at room temperature.
3.
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external surface.
4.
Clean all transparent surfaces (display lenses) with a mild soap solution, ammonia-
free glass cleaner, or isopropyl alcohol.
5.
Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
6.
Softly drag any dirt or grime to the outside of the transparent surface.
7.
Gently polish the transparent surfaces until they are free of haze and lint.
·
Always dry the transparent surfaces carefully after cleaning them.
S
PECIFICATIONS
Length
7.2 in (183 mm)
14.2 in (360 mm)
Note: Dimensions in inches rounded to the nearest decimal digit.
Value
Input Voltage
Range
Voltage Selection
Maximum External Temp.
104 °F (40 °C)
Output Connector
3-pin XLR
Product Name
Foot-C
Width
Height
2.6 in (66 mm)
Foot-C
Fixed
12 VDC, 1 A
Fixed
Cooling System
Convection
Channel Range
36
Item Code
09081024
Weight
4 lb (1.9 kg)
External Power Supply
Switching
100 to 240 VAC, 50/60 Hz
Auto-ranging
UPC Number
781462213725
Foot-C User Manual Rev. 2
Publicidad
Tabla de contenido
