Adam Equipment AZ extra Serie Manual De Instrucciones página 11

EN
The user can store and recall up to 103 PLU values as PLU1, PLU2, PLU3 and
PLU00 to PLU99.
The keys labelled [PLU1] and [PLU2] are used to immediately recall the most
frequently used PLU values saved as PLU1 and PLU2. The [PLU+] key is used to
access the other values saved as PLU3 and PLU00 to PLU99.
To recall one of these PLU values the following procedure applies.
1.
2.
3.
For example:
If the item is loaded on the pan, the Total Price window will show the total cost. If
nothing is loaded, only the PLU value saved for the location will be displayed in
the Unit Price window and the Total Price window will display "0,00 ".
© Adam Equipment Company 2011
To recall PLU1, simply press [PLU1].
The same applies to PLU2, simply press [PLU2].
To recall one of the other PLU values, press [PLU+]. The display
will show "LOAd"
entered immediately, then the value saved against the entered
PLU number will be recalled. If nothing is entered within a few
seconds of pressing the [PLU+] key, the value saved for PLU3
will be recalled.
Press [PLU+].
Press [1] and then [4] immediately.
Display will show "LOAd" "PoS 14" " " and then the PLU value
for PLU 14 will be displayed.
OR
Press [PLU+].
Wait for few seconds.
Display will show "LOAd" "PoS 00" " " and then the PLU value
for PLU 3 will be displayed.
"PoS 00"
" ". If a number (00 to 99) is
9