Special Warnings; Grounding Instructions - HoMedics JetSpa Ultra JS-200P Manual De Instrucciones

Baño pedicuro con acción de chorros
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SPECIAL WARNINGS

• DO NOT reach for an appliance that has fallen into water.
Unplug it immediately.
• DO NOT use while bathing or showering. Use only in a dry
area.
Caution:
• DO NOT place or store appliance where it can fall or be pulled
All servicing of
into a tub or sink. DO NOT place in or drop into water or other
this footbath
liquid.
must be
• DO NOT attempt to plug or unplug unit while feet are in the
performed
water.
by authorized
• Use appliance on a sturdy or level surface.
HoMedics
• If you have any concerns regarding your health, consult your
service
doctor before using your HoMedics footbath.
personnel only.
• Consult your doctor before using in case of illness or medical
condition, including but not limited to pacemaker use and
pregnancy.
• We recommend using this unit for no longer than 30 minutes
at a time. Extensive use could cause the product to overheat.
Should this occur, discontinue use and allow the unit to cool
Caution:
before operating.
To avoid injury
• If you experience pain in a muscle or joint for a prolonged
and irreparable
period of time, discontinue use and consult your doctor.
damage, always
Persistent pain could be a symptom of a more serious condi-
remain seated
tion.
when using
• NEVER use any footbath on open wounds, discolored areas,
footbath.
or any area of the body that is swollen, burned, inflamed or
Never stand on
where skin eruptions or sores are present.
or in the unit.
• Use of this product should be pleasant and comfortable.
Should pain or discomfort result, discontinue use and consult
your physician.
• NEVER use while sleeping or drowsy.
• Always unplug the unit when filling or moving the unit.
• Ensure that your hands are dry when operating the controls or
removing the plug.
• This product should NEVER be used by any individual
suffering from any ailments that would limit the user's capacity
to operate the controls.
4
• This product should NEVER be used by any individual
suffering from any ailments that would limit or altogether
inhibit the user's capacity to feel or have any sensation in
the body part that the product is being used for.

Grounding Instructions

Grounding Pin
This product must be grounded. If it should malfunction or
Figure A
breakdown, grounding provides a path of least resistance for
the electric current to reduce the risk of electric shock. This
product is equipped with a cord having an equipment-ground-
ing conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
Tab for
Grounding
Adapter
DANGER
Screw
Figure B
Improper connection of the equipment-grounding con-
ductor can result in a risk of electric shock. Check with
Grounded
a qualified electrician or serviceman if you are in doubt
Outlet
as to whether the product is properly grounded. Do not
modify the plug provided with the product - if it will not
fit the outlet, you may temporarily use an adaptor (such
as the one shown in Figure B) until you have a proper
outlet (such as the one shown in Figure C) installed by a
Figure C
qualified electrician.
This product is for use on a nominal 120-volt circuit, and has a
grounding plug that looks like the plug illustrated in Figure A.
A temporary adapter that looks like the adapter illustrated in
Figure B may be used to connect this plug to a 2-pole
Metal Screw
receptacle as shown in Figure D if a properly grounded outlet
Figure D
is not available. The temporary adapter should be used only
until a properly grounded outlet Figure C can be installed by
a qualified electrician. The tab for grounding screw Figure B
extending from the adapter must be connected to a
permanent ground such as a properly grounded outlet box
cover. Whenever the adapter is used, it must be held in place
by a metal screw. See Figures D and E.
Figure E
5

Publicidad

Tabla de contenido
loading

Tabla de contenido