Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Configuration And Operation
4.
Configuration And Operation
The Net-X™ is configured through the control panel, using the control panel buttons. Once
the Net-X™ is properly configured it operates without user intervention.
The Net-X™ can be used as a DMX splitter only, in which case the DMX In ports must be
assigned to the DMX Out ports, but the Net, Subnet, and IP address settings do not need
configuration.
The Net-X™ can be used as an Art-Net™ hub, in which case the Art-Net™ universes must
be assigned to the DMX Out ports, and the Net, Subnet, and IP address settings must be
configured.
The Net-X™ can be used as both a DMX splitter and an Art-Net™ hub simultaneously, in
which case both the DMX assignments and the Art-Net™ settings must be configured. For
more information, see Configuration Examples.
DMX In ports and Art-Net™ universes can be assigned to multiple DMX Out
ports.
Control Panel
The control panel is the mechanism for configuring the Net-X™ settings. It has a small LCD
screen and four buttons, which are described below.
<MENU>
<DOWN>
<ENTER>
Page 12 of
Button
Scrolls through the first level of options, or exits from the current menu or
function
Navigates upward through the menu list or increases the numeric value
<UP>
when in a function
Navigates downward through the menu list or decreases the numeric value
when in a function
Enables the currently displayed menu or sets the currently selected value in
to the current function
Function
Net-X™ User Manual Rev. 2
Publicidad
Tabla de contenido
