Tabla de contenido
Publicidad
SETTING THE CLOCK
1.
SET UNIT IN STANDBY MODE.
2.
PRESS & HOLD THE "MEM/CLK-ADJ" BUTTON (17), THE LCD DISPLAY (5) WILL SHOW " SET CLOCK " AND
THEN DISPLAY " 12HR OR 24 HR " PRESS SKIP
APPROPIATE AREA HOUR FORMAT(12HR/24HR). PRESS "MEM/CLK-ADJ" BUTTON (17) AGAIN TO
CONFIRM.
3.
THE LCD (21) WILL DISPLAY THE FIRST & SECOND DIGIT OF "00" IS FLASHING. PRESS SKIP
SKIP
BUTTON (2) TO SET THE CORRECT HOUR. PRESS "MEM/CLK-ADJ" BUTTON (17) TO STORE THE
CORRECT HOUR.
4.
THE THIRD & FOURTH DIGIT OF "00" IS FLASHING, PRESS THE SKIP
THE CORRECT MINUTES. THEN PRESS "MEM/CLK-ADJ" (17) TO STORE THE CORRECT MINUTE.
THE PRE-SET TIME WILL BE RE-SET COMPLETELY IF DIS-CONNECTING THE MAIN POWER
SUPPLY. YOU ARE RECOMMENDED TO SWITCH THE SYSTEM INTO STANDBY MODE FOR
CONVENIENCE USAGE.
LISTENING TO RADIO
MANUAL TUNING
1. PRESS FUNCTION BUTTON (19) TO SELECT " TUNER " MODE.
2. PRESS "BAND /
3. TUNE TO THE REQUIRED STATION BY PRESSING THE " TUNING / SKIP UP
BUTTON.
4. ADJUST VOLUME CONTROL (20) TO THE DESIRED VOLUME LEVEL.
AUTO TUNING
1.
PRESS FUNCTION BUTTON (19) TO SELECT " TUNER " MODE
2.
PRESS " BAND /
3.
PRESS AND HOLD THE " SKIP / TUNING UP
THEN RELEASE
4.
THE UNIT WILL START SEEKING AUTOMATICALLY AND STOP UNTIL A RADIO STATION IS REACHED.
5.
REPEAT STEP 3 & 4 UNTIL THE DESIRED RADIO STATION IS BEING REACHED.
6.
ADJUST VOLUME UP/DOWN CONTROLS (20) TO THE DESIRED VOLUME LEVEL.
PRESET STATIONS
YOU CAN STORE UP TO TOTAL OF 40 RADIO STATIONS (30 FM,10 AM) IN THE MEMORY.
1.
SET TO " TUNER " MODE
2.
TURN TO THE DESIRED RADIO STATION BY " MANUAL" OR "AUTO" TUNING METHOD.
3.
PRESS " MEM / CLK-ADJ" BUTTON (17) TO ENABLE PROGRAM STATE.
4.
PRESS " FOLDER / PRE-UP (16) OR FOLDER / PRE-DOWN
SELECT THE DESIRED STATION MEMORY POSITION FOR STORAGE.
5.
PRESS "MEM / CLK-ADJ " BUTTON (17) AGAIN TO CONFIRM THE SETTING.
6.
REPEAT STEP 2 TO 5 TO STORE OTHER STATIONS.
7.
PRESS " FOLDER / PRE-UP
STATIONS IN ORDER.
8.
TO RETURN NORMAL TUNER MODE, LEAVE KEYS FREE.
THE PRE-SET MEMORIES WILL BE CANCELLED COMPLETELY IF SWITCHING OFF THE MAIN POWER
BUTTON ON SYSTEM. YOU ARE RECOMMENDED TO SWITCH THE SYSTEM INTO STANDBY MODE FOR
CONVENIENCE USAGE.
YOU CAN OVERWRITE A PRESENT STATION BY STORING ANOTHER FREQUENCY IN ITS PLACE.
FM & FM-STEREO RECEPTION (BY REMOTE HANDSET)
PRESS THE " FM-ST/MONO " BUTTON AT REMOTE HANDSET REPEATEDLY, THE FM PROGRAMS ARE
RECEIVING IN MONO AND STEREO MODE REPEATEDLY. IN PARTICULAR WHEN STEREO SIGNALS ARE
WEAK. IT IS PREFERABLE TO RECEIVE THE PROGRAM IN MONO.
IF STEREO SIGNAL IS BEING RECEIVED, THE "ST" INDICATOR "
(21) TO SHOW FM STEREO PROGRAM IS NOW RECEIVING.
" BUTTON (15) TO SELECT DESIRED BAND (MW OR FM).
" BUTTON (15) AND SELECT THE DESIRED BAND (MW (AM) OR FM).
OR DOWN
MCD1700 / English instruction manual
OR SKIP
OR DOWN
(2) BUTTON FOR 1-2 SECONDS AND
BUTTON (AT REMOTE HANDSET) TO
" BUTTON AT REMOTE HANDSET TO SELECT THE PRESET
ENG 3
BUTTON (2) TO SELECT THE
OR SKIP
BUTTON (2) TO SET
OR DOWN
" WILL APPEAR ON LCD DISPLAY
OR
(2)
Publicidad
Tabla de contenido
