Snooper TruckmatePRO S5000 Guia De Inicio Rapido página 16

Create a Multi-route
Press 'Create multi-route' to begin. A screen is
● ●
displayed where you can edit the name of the
multi-route, change the start point and add your
destinations.
Press 'Edit Name' to create a name for your
● ●
new multi-route. Once you have created a name
press the 'Save' button in the top right hand
corner. (In the example shown on the right, we
have called it 'Test 1')
If you wish to change the start position of the
● ●
multi-route, press 'Change Start' to change
it. If you are happy with the start position, you
can now begin to enter the data of your first
destination.
Press 'Add' – you are provided with several
● ●
options to find your destination. For this
example, select 'Find address by post code' .
If you have the European version of the
● ●
Truckmate, you will need to select the 'Country'
first BEFORE typing the postcode. After you have
selected the correct country press 'Post Code' .
Enter the postcode using the keypad that is
● ●
displayed. If you make a mistake when entering
the post code you can press the 'Arrow' key at
the bottom of the keypad to erase the data and
then re-type the information. When you have
entered the correct postcode press the 'OK'
button on the keypad.
16 • UK