Start Up; Installing The Micro-Sd Card - Snooper TruckmatePRO S5000 Guia De Inicio Rapido

To utilise the AURA™ Camera database you will need to register your Truckmate and
perform a download. Please refer to 'Registering your Truckmate' , 'System Requirements
and Software Installation' later in this Quick Start Guide for further information.

Start Up

1. Installing the Micro-SD Card

Before using your Truckmate, you will need to install the Micro-SD Card included with
the device. The Micro-SD Card comes complete with a digital map of the UK and Ireland
or Western Europe depending on the model purchased and is also where the AURA
TM
camera database is stored if you choose to subscribe and download it.
Remove the Micro-SD card from its packaging and insert it into the Micro-SD Card slot
as indicated. Switch on the device by pressing and holding the standby power button
located on the top left hand side of the unit for 2 seconds. As soon as the device is
switched on, the Truckmate will automatically synchronise with the Micro-SD Card.
Once the synchronisation is completed, the Micro-SD Card will not function with any
other device. Your Truckmate is now ready to navigate and the camera database can be
downloaded if necessary.
Please note that if the unit does
not activate when you press and
hold the standby power button for
2 seconds it may require charging.
Refer to the section 'Charging the
internal battery' later in this guide.
Micro-SD Card
4 • UK