Pentair Water RO-2500 Instrucciones De Instalación Y Funcionamiento página 4

1 - PRECAUTIONS
IMPORTANT: Before installing this reverse osmosis system, make certain your water supply complies with
the following operating specifications. Failure to do so may reduce the effectiveness of the system and will
void the warranty.
Specifications
Thin Film Membrane:
Feed Water Pressure:
Temperature Range:
TDS:
Maximum Hardness*:
Sulphide, Iron and Manganese†:
Chlorine in Water Supply:
pH Limits:
Daily Product Water Rate‡:
TDS Rejection:
Turbidity:
* If the hardness of your water is above 171 mg/L (10 gpg), lime scale will build up rapidly on the membrane.
Scale build-up will plug the membrane and make the system ineffective. We do not recommend these
reverse osmosis systems to be used with water in excess of 171 mg/L (10 gpg) hardness.
† A maximum total level of approximately 0.01 ppm sulphide, iron or manganese is permissible. See your
local dealer to reduce these substances in your water.
‡Based on manufacturer's internal testing.
Parts Included: (See back of manual for diagram)
Pre-assembled filter system (mounting bracket, membrane housing, membrane, pre- and post-filter
housings and pre- and post-filter cartridges).
• Reverse osmosis membrane
• Inlet supply adapter
• Drain clamp
• 1/4" Tubing
• Tank valve
Tools and Materials Required
• Hand or electric drill
(cordless preferred)
• (2) Adjustable wrenches
• Slotted and Phillips screwdrivers
• File
• Safety glasses
• Drill bits: 1/8", 3/16", 1/4", 3/8"
NOTE: All tools may not be necessary for installation.
Read installation procedures before starting to determine what tools are necessary.
System Dimensions
Overall Dimensions:
Weight:
Tank Dimensions:
Tank Capacity Max:
Tank Air Pressure Empty:
Tank Weight (Full):
TFM-36
2.75–6.9 bar (40 to 100 psi)
4.4–37.7°C (40–100°F)
2000 ppm
171 mg/L (10 gpg)
0 ppm <0.1 ppm
Less than 2 ppm
3–11
44.5 Lpd (11.76 gpd)
92–99%
5 NTU Max
• Storage tank
• Chrome faucet
• Feed tubing
• Sump wrenches
• 3/8" Tubing
If sink does not have
hole for separate faucet:
• Centre punch
• Cone-shaped grinding wheel
• 1 1 ⁄ " hole saw or drill bit
4
• Safety mask
34.29 cm W x 12.7 cm D x 43.8 cm H
(13 1 ⁄ " W x 5 1 ⁄ " D x 17 1 ⁄ " H)
2 2 4
7.84 kg (17.3 lbs.)
34.29 cm W x 20.32 cm D x 22.86 cm H
(13 1 ⁄ " W x 8" D x 9" H)
2
4.9 L (1.3 gal.)
0.34 to 0.48 bar (5 to 7 psi)
6.5 kg (14.5 lbs.)
3
E
N
G
L
I
S
H