Beta 1871M Instrucciones página 31

Pneumatic tool connection
• Plug the pneumatic tool into the
universal socket (A).
• Connect the compressed air tube
(B) to the male ¼G coupling.
The device only operates with pneumatic tools with consumption
over 200lt/h.
Do not connect compressed air pipes
whose pressure is more than 15 bar.
To start the appliance, do not connect
tools whose operating pressure is
lower than 3 bar.
If you need to replace the ¼G male
socket (j) use non-magnetic utensils.
COMPRESSED
AIR
j
EN
MAX 15 bar
31