Lubrication Chart - Sears Craftsman 917.388013 Manual De Uso

M,,,T ,ANC SC,EDULE
FILL IN DATES _ :_ _:_ ,_
REGULARSERVICE ICE DATES
Check for Loose Fasteners if If
Clean/Inspect Grass Catcher
(If Equipped) If _
oa Clean Lawn Mower !
Clean Under Drive Cover
W (Power-Propelled Mowers) _/'
Check drive belt/pulleys
(Power-Propelled Mowers) I_
R
Check/Sharpen/Replace Blade t/3
I LubricationChart ik/ I_
Clean Battery/Recharge
IEIeclric Start Mowers) _ If4
iE Check Engine Oil Level
Change Engine Oil I_1.=
Clean Air Filter _ 2
NI Inspect Muffler
Clean or Replace Spark Plug
E Replace A irFilter P aperCanddge
I/2
I - Change more olten when operating undo" a heavy load or in h_gh ambient temperatures.
2 - Sentica more often when operating in dirty or dusty condiUons.
3- Replace blades more often when mowing in sandy sodl.
4 - Chmge 48 hours at end of season.
GENERAL RECOMMENDATIONS
The warranty on this lawn mower does
not cover items that have been subjected
to operator abuse or negligence. To
receive full value from the warranty,
operator must maintain mower as
instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your
unit.
All adjustments in the Service and
Adjustments section of this manual
should be checked at least once each
season.
• Once a year, replace the spark plug,
clean or replace air filter element and
check blade for wear. A new spark
plug and clean/new air filter element
assure proper air-fuel mixture and help
your engine run better and last longer.
• Follow the maintenance schedule in
this manual.
BEFORE EACH USE
1. Check engine oil level.
2. Check for loose fasteners.
LUBRICATION
Keep unit well lubricated (See "LUBRI-
CATION CHART").
LUBRICATION CHART
(_) Wheel adjuster
each wheel)
(!) Brake
spring
bracket
Engine oil
(_) Rear
(_) Handle bracket mounting pins door hinge
(_) Spray lubricant
(_) See "ENGINE" in Maintenance section.
10
IMPORTANT: Do not oil or grease
plastic wheel bearings. Viscous
lubricants will attract dust and dirt that
will shorten the life of the self-lubricat-
ing bearings. If you feel they must be
lubricated, use only a dry, powdered
graphite type lubricant sparingly.