Lubrication Chart; General Recommendations; Before Each Use - Sears Craftsman 917.388012 Manual Del Usuario

MAINTENANCE SCHEDULE _f
FILL IN DATES
AS YOU COMPLETE
REGLlt.AR SERVICE f SERVICE DATES
Check for Loose Fasteners _
Cteardlnspect Grass Catcher
(If Equipped) I1_ 11_ II_
M
clean Lawn Mower I_/ I ; V/
O Clean Under Drive Cover
I
(Power-proF_lted Mowers) I_'
Check Give dew ulleys
RE ipower.Prope,_°Mowers) t_
Check/Sharpen/Replace Blade !/'_}
Lubrication Chart _
Clean Battew/Recha
Electd¢ Start Mowe_q_ e I1_ it/4
I
E Check Engine 011Level _/
N Chan_e Engine OII
b/t_
G Clean Air Filter Ip# :z
Inspect Muffler
N
Clean or Reptace Spark Plug V /
E Replace Air Filter Paper Cartridge t//2
1 - Cl'ang e reom o_ whe_ operating uqde¢s ha_ load or II1highan'ble_ temparaturu,
2 - Son/k_ morn onen *_d_nopecat_g in din'y e¢dL_y condi_ons.
s - Rep_ blades rmreoe_m when mow_g_ _rdy aoM.
4. C_arge 48 houn_al end dm.
GENERAL RECOMMENDATIONS
The warranty on this lawn mower does
not cover items that have been subjected
to operator abuse or negligence. To
receive full value from the warranty,
operator must maintain mower as
instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your
unit.
All a_ustrnents in the Service and
Adjustments section of this manual
should be checked at least once each
season.
• Once a year, replace the spark plug,
clean or replace air filter element and
check blade for wear. A new spark
plug and clean/new air filter element
assure proper air-fuel mixture and help
your engine tun better and last I_Jer.
• Follow the maintenance schedule in
this manual.
LUBRICATION CHART
(_) Brake
spring
bracket
ne oil
Rear
(_) Handle bracket mounting pins door hinge
(_) Spray lubricant
BEFORE EACH USE
1. Check engine oil level.
2. Check for loose fasteners.
LUBRICATION
Keep unit well lubdcated (See "LUBRI-
CATION CHART').
_) Su "ENGINE" In Maintenance section.
10
IMPORTANT: Do not oil or grease
plastic wheel bearings. Viscous
lubricants will attract dust and dirt that
will shorten the life of the self-lubdcat-
Ing bearings, if you feel they must be
lubricated, use only a dry, powdered
graphite type lubricant sparingly.