Main Features - Eldes EKB3 Guia De Instalacion

EN
1 . GENERAL OPERATIONAL DESCRIPTION

MAIN FEATURES:

• Arming and disarming
• STAY-arming
• Violated zone bypass and bypassed zone activation
• System configuration
• PGM output control
• Back-light
• Visual indication by LED indicators
• Audible indication by built-in buzzer
EKB3 is a wired accessory intended for ELDES alarm systems
ESIM364 and ESIM264. This keypad comes equipped with 16
keys and 18 LED indicators and a buzzer for audio indication.
Typically, the configuration of the system by EKB3 keypad is
carried out by activating the Configuration mode using the
installer code and entering a valid configuration command using
the number keys
to clear the characters that have been entered. Alternatively,
*
the user can wait for 10 seconds until the keypad buzzer will
provide a long beep indicating that the entered characters have
been cleared. By pressing any key on the keypad will result in
activation of the back-light lasting for 60 seconds after the
last keystroke. When typing in the characters, each keystroke
is followed by a short beep of the keypad buzzer, while the red
indicator lights up reflecting a respective number key
that is being pressed when typing in a configuration command
(key is indicated by red indicator "10"). Additionally, the LED
0
indicators and the keypad buzzer indicate the alarm condition.
EKB3 comes equipped with 1 zone terminal designed for passive
wired digital sensor connection, such as magnetic door contact,
and a tamper switch located on the back side of the device for
enclosure state supervision.
It is possible to connect up to 4 EKB3 devices to ESIM364 or
to ESIM264 alarm system. The maximum wire length is 100m
(328.08ft).
8 EN
, key
0
9
for confirmation and key
LED KEYPAD EKB3
0
9