Connecting The Ac Adaptor - Dexibell VIVO S1 Guia De Inicio Rapido

Before You Start to Play
4

Connecting the AC Adaptor

The VIVO S1 is an electronic instrument that requires some form of
electrical power. You can power your VIVO S1 using the supplied adaptor
or 8 commercially available rechargeable batteries (AAtype Ni-MH).
1.
Rotate the [VOLUME] knob toward the left position to
minimize the volume.
VOLUME
2.
Connect the AC adaptor to VIVO S1's DC IN jack positioned
to the rear bottom panel.
DC IN
NOTE
Be sure to use only the AC adaptor (DEXIBELL DYS624-120200W,
supplied with the unit. Also, make sure the line voltage at the
installation matches the input voltage specified on the AC
adaptor body. Other AC adaptors may use a different polarity, or
be designed for a different voltage, so their use could result in
damage, malfunction, or electric shock.
NOTE
If you won't be using the VIVO S1 for an extended period of time,
disconnect the power cord from the electrical outlet.
NOTE
To avoid malfunctions, never disconnect the AC/DC adaptor
while the instrument is turned on.
3.
Plug the AC Adaptor into a power outlet.
Installing and Removing Batteries
The VIVO S1 has a compartment into which you can install 8 commercially
available AA-type Ni-MH batteries (which are rechargeable). You can
therefore play your instrument without connecting the supplied adaptor.
1.
Switch off the VIVO S1.
2.
The battery compartment is positioned on side bottom of
the instrument. Turn upside down the instrument placing
it on a soft cloth to avoid scratching.
AC Adaptor
To an AC outlet
Bottom side
Battery compartment
Screws
3.
Use a coin to unscrew the screws holding the cover of
battery compartment and lifting the cover.
4.
Insert 8 rechargeable AA-type Ni-MH batteries into the
compartment, taking care to orient them in accordance
with the "+" and "–" indications.
NOTE
Use rechargeable AA-type Ni-MH batteries only. Do not use
carbon, alkaline or lithium batteries.
5.
Close the battery compartment and use a coin to screw
the screws that hold the cover.
NOTE
Be aware that the batteries cannot be recharged simply by
leaving them in the VIVO S1's compartment. You will need an
external charging unit.
NOTE
When replacing batteries, be sure to insert them correctly
(ensure correct polarity).
NOTE
Remove the batteries whenever the VIVO S1 is to remain unused
for an extended period of time.
Battery charge indication
NOTE
If, while using batteries, the "System will turn off in a few
minutes" message appears in the display, you need to replace
the batteries right away (or use the supplied adaptor).
Icon
It means that the charge is still at the maximum level.
It refers to a medium level.
Low charge level.
Warning! Replace the batteries at your earliest convenience.
NOTE
The battery charge indication is only an approximation.
Explanation
9