memorex MVBD2535GPH Guia Del Usuario página 42

WIRELESS CONNECTION – STANDARD NETWORK
CLEAR
1
DISPLAY
RETURN
SLOW
To enter the Network Setup menu, while no disc is inserted
PREV.
or disc is in the Stop mode, if not already at the Setup screen
STEP
press the HOME/SETUP button, select Settings using the
RANDOM
Navigation (π,†) buttons 1 and then press the Navigation
POWER
(®) button 2. Select Network using the Navigation (π,†)
buttons 1 and then press the Navigation (®) button 2.
NOTE: The Wireless Setup procedure only has to be
A
performed once. After that, the unit will automatically
connect when it is turned on. If unplugged, the connection
may need to be reset.
CLEAR
3
DISPLAY
RETURN
SLOW
PREV.
Select Network List using the Navigation (π,†) buttons
1, then press the Navigation (®) button 2 to enter; a list
STEP
of available networks will appear with symbols as shown to
RANDOM
the right. Select the desired network using the Navigation
(π,†) buttons 1, then press the ENTER button 3. If the
Wi-Fi network name is too long to display, you can use the
Navigation (®) button 2 to view.
If the Network is not encrypted (
is OK, a checkmark will appear
and you will be connected to the internet.
If the Network is encrypted (
have to enter a password.
When the screen appears, press the ENTER button 3 to
bring up the keyboard. Enter the password using the
Navigation (π,†) buttons 1, then press the ENTER button
3 to enter the letter. Press the x (arrow upxx) key to act as
a Shift in order to make capital letters, as passwords are
case-sensitive. After entering the password, click done and
then click CONNECT to connect; a checkmark will appear
and you will be connected to the internet if the password was
correct.
SETUP MENU (CONTINUED)
SEARCH
ANGLE TV RES.
HOME/SETUP
1
DISC
MENU
2
1
POP-UP
MENU
STOP PAUSE PLAY
REW F.F NEXT
SUBTITLE AUDIO
A-B REPEAT
OPEN/CLOSE
B C D
SEARCH
ANGLE TV RES.
HOME/SETUP
1
DISC
MENU
2
3
b
1
POP-UP
MENU
STOP PAUSE PLAY
g
REW F.F NEXT
SUBTITLE AUDIO
n
b A-B REPEAT
g
n
), and the connection
), and you select it, you will
2
NOTE: If not connected to the internet when the unit is plugged
in, you will get an error message prompting you to press the
Red Color button to bring up the Wired/Wireless option.
If using a wired internet connection, see page 39.
If using a wireless internet connection: Select Wireless using
the Navigation (π,†) buttons 1, then press the Navigation
(®) button 2 to enter. In most cases, you can perform step
3 below to connect to an existing network.
However, in some cases, you will have to connect to a
wireless Network using Wi-Fi protected Setup (WPS) or a
wireless Network using Manual IP Configuration. These are
described on the next page.
NETWORK ICONS
The unit is currently connected to this
network.
The wireless network properties (if any)
have been saved in the unit's memory for
future use.
The wireless network supports WPS.
b
The wireless network supports 802.11b.
g
The wireless network supports 802.11g.
The wireless network supports 802.11n
n
(supported at 2.4 GHz only). Not all routers
are compatible with this unit.
Signal Strength.
The wireless data is encrypted.
The wireless data is not encrypted.
41
CLEAR SEARCH
ANGLE TV RES.
HOME/SETUP
1
DISPLAY
DISC
MENU
2
1
POP-UP
RETURN
MENU
SLOW STOP PAUSE PLAY
PREV. REW F.F NEXT
STEP SUBTITLE AUDIO
RANDOM A-B REPEAT