Adjusting The Tinnitus Noiser Level; Alarm Clock; Setting The Alarm Clock - Audio Service G2 Manual De Instrucciones

24
Turning on:
Press any button to activate the display.
Wait until the information about the turned off hearing sys-
tems disappears.
The menu is displayed and the HI Mute / Unmute entry is still
selected.
To turn your hearing systems back on, confirm the selection by
pressing the program change button.

ADjUSTING THE TINNITUS NOISER LEVEL

This function is only available if your hear-
ing Care Professional has configured the
tinnitus noiser for both your hearing sys-
tems and for the control buttons of the
remote control.
You can recognize the setting, if the cor-
responding icons are displayed next to the
control buttons.
To adjust the noiser level, press the upper or the lower control
button.
DAILY USE

ALARM CLOCk

ALARM CLOCk
You can set an alarm clock reminding you at the same time every
day by a repeating signal tone and by an alarm clock icon.

seTTINg The AlArm ClOCK

To enter the menu, press the volume up button and the volume
down button simultaneously.
Navigate to the menu entry Alarm by pressing the volume up
button or the volume down button.
Confirm your selection by pressing the
program change button.
The entry field for hours is highlighted.
The alarm is initiated by the remote control but the acoustic
signal is emitted by your hearing systems.
Turn on your hearing systems.
Keep your hearing systems within the remote con-
trol's operating distance.
Otherwise you will not be able to hear the alarm.
25