Displaying Contact Data; Setting The Language Of The Menu; Maintenance And Care; Troubleshooting - Audio Service G2 Manual De Instrucciones

32

DISPLAYING CONTACT DATA

If your hearing Care Professional has saved his or her contact data
on the remote control, you can view this information:
To enter the menu, press the volume up button and the volume
down button simultaneously.
Navigate to the menu entry Contact by pressing the volume up
button or the volume down button.
Confirm your selection by pressing the
program change button.
The contact data is displayed.
To return to the standard display, press
the program change button.

seTTINg The lANgUAge Of The meNU

Ask your hearing Care Professional.
SETUP AND SERVICE FUNCTIONS

MAINTENANCE AND CARE

MAINTENANCE AND CARE / TROUBLESHOOTING
MAINTENANCE AND CARE
NOTICe
Do not put your remote control in water!
Do not clean your remote control with alco-
hol or benzine.
Clean the remote control as necessary with a soft cloth and
use a nonabrasive household soap.
Avoid abrasive cleaning liquids with additives such as citric
acid, ammonia, etc.

TrOUbleshOOTINg

Problem Possible solutions
The remote control Check, if the key lock is activated.
does not work. Deactivate it, if necessary.
Change the batteries.
Another remote Return remote control and hear-
control affects your ing systems to your hearing Care
hearing systems. Professional. Your hearing Care
Professional can change the wire-
less address to avoid interference.
Consult your hearing Care Professional if you encounter further
problems.
33