Important Safety Instructions - Concept VV 574X Manual Del Usuario

ACKNOWLEDGMENT
Thank you for purchasing a Concept product. We hope you will be satisfied with our product throughout its
service life.
Please study the entire Operating Manual carefully before you start using the product. Keep the manual in a safe
place for future reference. Make sure other people using the product are familiar with these instructions.
Technical parameters
Voltage
Input
Noise level

IMPORTANT SAFETY INSTRUCTIONS

• Use the unit only as described in this operating manual.
• Remove all the packaging and marketing materials from the unit
before the first use.
• Make sure the mains voltage corresponds to the values on the
rating plate.
• For further protection, it is recommended to install a current
protector (RCD) with the actuating current not exceeding 30 mA in
the power circuit of the bathroom. Please consult an electrician.
• The unit reaches high temperatures during operation and remains
hot for some time after being turned off. Do not touch the hot
surfaces. Use the handles and buttons. There is a risk of being
burned.
• The unit may not be cleaned, stored, or covered until it has cooled
down completely.
• Do not leave the unit unattended while it is turned on or even
only plugged into the wall outlet.
• If you need to lay the unit aside during use, always switch it off
and lay it on a fireproof surface.
• Before plugging in or unplugging the unit from the wall outlet,
make sure the switch is OFF.
• When disconnecting the unit from the wall outlet, never pull the
VV 574X
220–240 ~50/60 Hz
1400-1600 W
< 84 dB(A)
EN
33