VWR VAPOUR-Line lite Manual De Instrucciones página 14

Printer records:
a. Date
b. Batch number
c. Temperature recorded during the segment of time programmed
d. Sterilisation progressive number carried out automatically
How to insert the paper
Pressing the two levers (E), open the panel and insert paper
as shown.
If the paper is correctly installed the 'pos F' LED light is on.
A flashing LED indicates that the paper is not properly installed.
By pressing button G you can scroll the paper.
Printer settings
NOTE: The printer must be turned on at the main switch.
• HOW TO MODIFY THE DATE:
- Press 'ENTER' twice
Display will show 'OFF'
YEAR
- Change using the ▼▲ buttons
- Press 'ENTER' to confirm
- Do the same for MONTH and DAY
• HOW TO MODIFY THE BATCH NUMBER:
(at the end of the cycle, to assign a new number to next cycle)
- Press 'ENTER' twenty times
The display will show 1
n bat
- Bunch: Change using the ▼▲buttons
- Press 'ENTER' to confirm
• HOW TO MODIFY THE PRINTER INTERVAL:
- After modifying the batch, the display will show: '1.00 P.int'
- Change using the ▼▲buttons
- Press 'ENTER' to confirm
- Display will show: 'OFF'
TEST
• TO EXIT PRESS 'START-STOP' 5 TIMES
14