Use of the manual
Using this manual will help you use this instrument efficiently. The manual should be kept in a
convenient place near the instrument for ease of use.
Safety information
•
Use the device only for the indicated purposes
•
The device must be correctly installed according to these instructions, before starting
any operation
•
Never disconnect the device by pulling the electrical cable from the socket
•
Electrical cables should be replaced immediately when damaged
•
While removing the item connected to a power source, pay attention to the electrical
connection cable
•
Always disconnect from the power source when:
A. Repairing or carrying out maintenance work; these operations must be carried out by
qualified staff only
B. Cleaning the unit
C. Use original spare parts and accessories for any replacement
Do not use this device in the presence of explosive gases.
Precautions during installation
When the electrical system socket is not compatible with device, replace it paying
attention to the following coded cable colours.
Brown: Live - Blue: Neutral - Yellow/green: Earth
Be aware that the voltage and frequency of the electrical system being used is
compatible with the device.
The device must be connected to a ground wire. For any questions please contact a
qualified electrician. Before starting up the device, be sure that the ventilation grids are
totally free of obstruction.
4