Install The Cable Management Arm And Slide Rails - Digital Server 3100R Serie Guia De Instalacion

4

Install the cable management arm and slide rails

CAUTION
The chassis slides are lightly greased. Handle
them carefully to avoid soiling of clothing.
1. Install cable management arm bracket
chassis using two M4 x 10 mm Lg screws
2. Attach the cable management arm
brackets using two #10 pan head screws
6
3. Pull the narrow segment
of a chassis slide and detach it completely by pressing
down the retainer spring
Position the chassis slide track so that the end of the
to rear of
chassis slide with three holes
.
server. Secure the chassis slide track to the server using
to one of the
three screws M4 x 6 mm Lg
.
4. Attach the remaining side rail.
5. Using two people, install the server onto the slide rails.
6. Slide the server into the rack and then secure it.
8
of the chassis slide out
while continuing to pull.
extends past the
8 .
DIGITAL Server 3100R/3200R Series